- Quest Climate Control
- >
- Quest 4500 Hydronic Heater Unit
- >
- Quest 4500 Hydronic Heater Unit
Quest 4500 Hydronic Heater Unit
SKU:
4035550
CA$47,750.00
CA$47,750.00
Unavailable
per item
The Quest PowerHeat 4500 - More Than Just a Ground Thaw Unit The PowerHeat 4500 is more than just a ground thaw unit and it allows you to have a better ROI in two very meaningful ways. 1. The PowerHeat 4500 can be used with the Quest Hydronic Accessories to do building heat, emergency heat, and provide heat in many ways for the oil & gas, and environmental industries. See our Quest Hydronic Accessories YouTube video https://youtu.be/wfIlE16wkng for more information. 2. It can also accommodate up to 4,500 feet of hose to allow 9,000 sq. ft. of thaw with no additional hose reels or booster pumps - 50% more thaw than the E3000. The onboard manifold system allows you to move the unit without having to pick up all of your ground thaw hose. It also allows you to do multiple areas of thaw.
The 500’ loops allow the user to only pull the amount of hose needed for the job. The shorter loops also provide much better heat distribution during the job. The optional remote manifold allows you to do bridge decks without having to lift the unit into place. It also allows multiple areas of thaw or cure as well as temporary heat, all at the same time! With our stainless steel combustion chamber, there is no need for mixing booster pumps when doing concrete curing. Just dial down the Aquastat and you are ready to cure. No need to worry about a roll up door freezing or breaking as our unique design allows the door to pivot back inside the unit.
Features: Thaw up to 9,000 Sq. Ft Up to 4500 Ft. of Hose 385k BTUs 230 Gallon Fuel Tank 7kw Generator Easy Accessibility Best Heat Distribution User Friendly Full UL/CSA Certification
4500 Specifications Diesel Part Number 4035550 Heat Input 385,000 Heat Output 308,000 Efficiency 80% Fuel Input Rate @ Full Load 2.7 GPH Run Time @ Full Load 85 Hours Fuel Tank Capacity 230 Gallons Electrical Requirements 20 amp circuit, 110V Heat Transfer Fluid Propylene Glycol Operating Range -30°F to 140°F Fluid Temp Range 100-200 Pump 1 HP Hydronic Flow Rate 30 GPM/1.89 liters per sec Hydronic Connection 1” Dimensions 176x93x97 1/4 Weight 7900 lbs Weight w/Full Fuel Tank 9550 lbs
Heat Up to 519,000 cubic ft Thaw 9,000 sq ft Cure 13,500 sq ft Frost Prevention 13,500 sq ft
The 500’ loops allow the user to only pull the amount of hose needed for the job. The shorter loops also provide much better heat distribution during the job. The optional remote manifold allows you to do bridge decks without having to lift the unit into place. It also allows multiple areas of thaw or cure as well as temporary heat, all at the same time! With our stainless steel combustion chamber, there is no need for mixing booster pumps when doing concrete curing. Just dial down the Aquastat and you are ready to cure. No need to worry about a roll up door freezing or breaking as our unique design allows the door to pivot back inside the unit.
Features: Thaw up to 9,000 Sq. Ft Up to 4500 Ft. of Hose 385k BTUs 230 Gallon Fuel Tank 7kw Generator Easy Accessibility Best Heat Distribution User Friendly Full UL/CSA Certification
4500 Specifications Diesel Part Number 4035550 Heat Input 385,000 Heat Output 308,000 Efficiency 80% Fuel Input Rate @ Full Load 2.7 GPH Run Time @ Full Load 85 Hours Fuel Tank Capacity 230 Gallons Electrical Requirements 20 amp circuit, 110V Heat Transfer Fluid Propylene Glycol Operating Range -30°F to 140°F Fluid Temp Range 100-200 Pump 1 HP Hydronic Flow Rate 30 GPM/1.89 liters per sec Hydronic Connection 1” Dimensions 176x93x97 1/4 Weight 7900 lbs Weight w/Full Fuel Tank 9550 lbs
Heat Up to 519,000 cubic ft Thaw 9,000 sq ft Cure 13,500 sq ft Frost Prevention 13,500 sq ft